Protective Film China Company is a furniture protection film factory supplying temporary polyethylene protective film for furniture and appliance finished surfaces. The range covers furniture boards, decorative laminates, cabinet doors, tabletops, refrigerator doors, PCM and VCM panels, painted housings, and stainless steel appliance surfaces. Grades are matched to surface finish, dwell time, handling conditions, and removal stage. Roll, slit-roll, sheet, and printed-film options suit assembly, storage, and delivery.

Product details

  • Film structure:Temporary self-adhesive PE protection film.
  • Typical thickness:30-100 um, matched to finish and dwell time.
  • Colors:Clear, blue, white, black-and-white, or printed film.
  • Tack levels:Low tack, low-to-medium tack, and medium tack.
  • Supply formats:Jumbo rolls, slit rolls, finished rolls, sheets, and cut pieces.
  • Main surfaces:Furniture boards, cabinet panels, refrigerator doors, and appliance exteriors.

Showing all 3 results

Finished surfaces remain vulnerable until handover. Scratches, dust, fingerprints, and abrasion marks can appear during assembly, stacking, warehousing, and transport. A suitable furniture surface protective film should sit flat, stay stable at edges and corners, and peel away cleanly at the agreed stage.

One grade does not suit every finish. A high-gloss door, matte laminate, lightly textured board, and coated refrigerator front can respond differently to the same adhesive. Transparent film keeps the surface visible during inspection. Blue and printed grades make coverage easier to identify.

Product Range / Covered Products

The range includes furniture board protective film for manual application and automated laminating lines. Self-adhesive grades can match HPL, CPL, compact panels, painted cabinet parts, and appliance exteriors. Printed film can carry logos, instructions, or arrows.

Product Series

Product Series

Recommended Surfaces

Selection Focus

Glossy-panel low-tack film

High-gloss doors, tabletops, smooth furniture boards

Lower adhesion build, clean peel, reduced haze or ghosting

Matte-panel low-to-medium-tack film

Matte laminates, painted panels, housings

Gentle removal, stable edge holding

Furniture-board medium-tack film

Laminated and lightly textured panels

Corner lifting after stacked storage

Refrigerator-door protection film

Painted, laminated, PCM, and VCM fronts

Surface trial, removal window

Stainless steel appliance protective film

Brushed or fingerprint-resistant exteriors

Coating compatibility, residue check

Printed PE factory film

Furniture and appliance lines

Logos, instructions, arrows

Selection Guide

Selection should begin with the actual surface, not only the material name or film thickness. Glossy coatings usually start with a lower-tack trial because excessive adhesion can leave marks, haze, ghosting, or gloss change after storage. Matte and lightly textured finishes may need low-to-medium or medium tack to limit lifting during stacking and delivery.

When specifying protective film for refrigerator door applications, note whether the finish is painted, brushed, laminated, PCM, VCM, or fingerprint-resistant. Also confirm application method, stacking conditions, storage period, and removal stage. A film removed after assembly may need a different adhesion balance from one kept through warehousing and installation.

Material / Adhesive Selection Comparison

PE Structure or Adhesive Option

Typical Use

Validation Focus

LDPE-based removable film

Smooth panels and appliance exteriors

Laydown, clarity, clean removal

LLDPE-containing PE film

Panels needing more flexibility

Edge holding, corner lifting, roll flatness

Co-ex PE structure

Tailored strength and removability

Surface trial, dwell time, storage simulation

Water-based acrylic adhesive

Common temporary grades

Peel consistency, residue check

Solvent acrylic adhesive

Selected coated surfaces

Adhesion build, clean peel

Rubber-based removable adhesive

Selected approved applications

Compatibility, removal window, adhesive transfer

Before bulk approval, test the actual panel and record cleaning, pressure, dwell time, storage period, stacking method, and removal stage. Review performance at agreed checkpoints and extend the trial to reflect warehousing. An agreed 180-degree peel reference can compare rolls and batches but does not replace the panel trial.

Benefits

  • Helps reduce scratches, dust, fingerprints, stains, and abrasion marks.
  • Matches glossy, matte, painted, laminated, and textured finishes.
  • Supports cleaner removal with a lower risk of residue, haze, and ghosting.
  • Offers grades matched to handling-related tear, puncture, and abrasion resistance.
  • Keeps edges stable through the approved protection cycle.
  • Improves repeat-order control through retained samples and batch records.

How Should Furniture Protection Film Be Approved for Glossy, Matte, Painted, and Laminated Surfaces?

Apply the shortlisted grade to a cleaned sample and record pressure, date, and dwell time. Review wetting, edges, bubbles, local lifting, and corner stability after 24 h, 72 h, or the agreed storage simulation. Peel slowly and inspect under angled light for residue, marks, haze, ghosting, gloss change, and coating disturbance. Final approval should remain tied to the actual panel.

TDS / Technical Range

Item

Typical Range / Customizable Value

Base film

PE, LDPE-based PE, LLDPE-containing PE, or co-ex PE

Film thickness

Common reference 30-100 um, other gauges subject to confirmation

Adhesion level

Low tack, low-to-medium tack, or medium tack

Adhesive system

Removable water-based acrylic, solvent acrylic, or project-specific adhesive

Roll width

Common reference 50-1600 mm, matched to panel width and equipment

Roll length

Common reference 100-1500 m, matched to handling method

Film color

Clear, blue, white, black-and-white, or customized color

Printing

Logo, warning text, instructions, reminders, or arrows

Supply format

Jumbo roll, finished roll, slit roll, sheet, or cut piece

Winding direction

Regular wound or reverse wound

Slit-width tolerance

Agreed by roll width, equipment, and application method

Peel-force confirmation

Grade-dependent, checked by agreed method and panel trial

Reference peel method

180-degree reference where required, with substrate, speed, and dwell time noted

Storage validation

Initial, 24 h, 72 h, or project-specific review

Surface inspection

Angled-light check for residue, marks, haze, ghosting, and gloss change

Quality control

Roll flatness, slit-edge quality, retained sample, and batch traceability

Applications

  • Furniture boards, laminates, cabinet panels, cabinet doors, and tabletops.
  • High-gloss, matte, painted, laminated, and textured surfaces.
  • Refrigerator doors, freezer fronts, PCM panels, and VCM panels.
  • Painted housings and stainless steel appliance surfaces.
  • Washing-machine fronts, dishwasher panels, and kitchen-appliance facings.

Customization Options

As a furniture protection film factory, Protective Film China Company can match thickness, tack level, adhesive system, width, roll length, color, printing, winding direction, and format to the approved sample. For automated lines, confirm slit width, roll flatness, core requirement, winding direction, and arrow orientation. For repeat orders, record finish, dwell time, removal stage, storage condition, peel method, and retained-sample code.

When Should Temporary PE Film Be Removed from Furniture and Appliance Finished Surfaces?

Temporary PE film should remain only for the approved period. Removal may take place after assembly, delivery, installation, or before use. Longer warehousing, stacked storage, heat, and humidity can change edge holding and adhesion build. Lift one corner and peel slowly at a controlled angle. After removal, inspect under angled light for residue, marks, coating change, haze, or discoloration.

FAQ

Can one PE film be used on glossy and matte furniture panels?

Not automatically. Gloss, texture, dwell time, and removal stage should be tested separately. Glossy panels often start with a lower-tack trial, while textured surfaces may need stronger edge holding.

What should be confirmed before selecting film for a refrigerator door?

Check the finish, panel width, application method, storage period, removal stage, and whether the surface is painted, brushed, PCM, VCM, laminated, or fingerprint-resistant.

Is clear or blue film better for an assembly line?

Clear film keeps the surface visible for inspection. Blue film makes coverage easier to identify. The better option depends on workflow and quality-control method.

Why keep retained samples for repeat orders?

Retained samples provide a reference for tack level, removal, roll flatness, slit-edge quality, and appearance across batches.