Protective Film China Company is a manufacturer of temporary films for glass, stone, countertops, synthetic carpet, and coated finishes. As a surface protective film supplier, we provide adhesive surface protection film, tested low tack grades, blue glass film, reverse-wound carpet film, and adhesive-free cling options. Thickness, tack level, color, roll format, exposure condition, and removal window are matched to the substrate before bulk supply.
Showing all 6 results
Temporary film should stay in place during renovation, transport, installation, and handover, then peel cleanly. A practical surface protection film specification starts with the substrate, finish, working condition, and dwell time. Smooth glass may need blue coverage. A cured coating may need low tack surface protection film. Polished stone and synthetic carpet require different structures.
When sourcing China surface protection film, confirm the substrate, dust, overspray, moisture, foot traffic, UV conditions, temperature change, and planned removal date. Thickness matters, but the wrong adhesive can lift at the edges, leave residue, or mark a sensitive finish.
Product Series | Typical Surface | Protection Method | Practical Selection Note |
Glass and Window Film | Window panes, doors, smooth glass | Low tack adhesive or cling | Clear for inspection; blue for visible coverage |
Stone and Countertop Film | Marble, granite, quartz, counters | Low or medium tack adhesive | Approve on the actual finish and check gloss |
Temporary Carpet Film | Dry synthetic carpet, corridors, stairs | Carpet-specific self-adhering film | Reverse-wound rolls simplify application |
Hard Surface Protection Film | Cured coatings and glossy finishes | Low or medium tack adhesive | Match holding strength with clean removal |
Adhesive-Free Cling Film | Smooth, glossy, non-porous surfaces | Electrostatic cling | For repositioning or glue-free contact |
Project-Confirmed Process Grade | Surfaces exposed to mild heat or humidity | Matched removable adhesive | Confirm exposure time and removal stage |
Stone protection film, marble protection film, and countertop protection film need separate tack approval. Texture and dwell time can change removal performance. Glass surface protective film needs separate approval for coated, frosted, or treated glass.
Material / Adhesive Option | Best Fit | Advantages | Points to Confirm |
PE film with water-based acrylic pressure-sensitive adhesive (PSA) | Glass, stone, counters, smooth hard surfaces | Flexible, removable, tack-customizable | Cleanliness, peel target, dwell time, humidity, removal window |
Low tack acrylic adhesive | Delicate glossy or cured coatings | Reduces excessive bonding | Edge lifting, early detachment, residue |
Medium tack acrylic adhesive | Hard surfaces needing stronger hold | Stable during site work | Clean removal on each coating and color |
Carpet-specific adhesive | Dry synthetic carpet | Supports foot traffic | Fiber type, dryness, reverse winding, approved period |
Adhesive-free cling structure | Smooth glossy non-porous surfaces | Repositionable and avoids direct adhesive contact | Not for rough stone, carpet, or heavy traffic |
Co-ex self-adhering structure | Selected smooth surfaces | No separate adhesive layer | Cling strength and compatibility |
Begin with the actual substrate, then match adhesion to the working condition. A thicker film can improve puncture resistance, but it cannot correct an unsuitable adhesive. Low tack is not automatically safer: too little hold may cause edge lifting, while excessive bonding can leave residue.
Apply candidates to clean, dry samples. Repeat the peel review after 48-72 hours because adhesion can build during dwell time. Newly installed carpet should stabilize first; a 72-hour waiting reference may apply. For peel values, agree the substrate, 180-degree peel method, speed, dwell period, and conditioning environment.
Smooth glass and glossy non-textured finishes may use low tack removable film or adhesive-free cling, depending on required hold. Blue film helps installers identify covered panes. Polished stone and countertops need removable adhesive approved on the actual finish. Carpet requires a dedicated self-adhering grade for dry synthetic fibers. Do not move an approved film to another coating, color, or texture; changes can lead to lifting, residue, ghosting, or marks.
Item | Typical Range / Customizable Value |
Product Group | Glass film / stone and countertop film / carpet film / hard-surface low tack film / adhesive-free cling film / project-confirmed process grade |
Film Material | PE film / co-ex structure / project-matched adhesive-free structure |
Thickness | Grade-dependent range confirmed against substrate and protection duty |
Adhesion Level | Low tack / medium tack / carpet-specific tack / matched removable adhesion |
Adhesive System | Water-based acrylic PSA / project-confirmed removable adhesive / adhesive-free cling |
Colors | Clear / blue translucent / project-matched color |
Width and Length | Custom slit width / project-based roll length |
Winding Direction | Regular wound / reverse wound |
Converting | Perforation / sheet cutting / die cutting / custom printing |
Exposure | Indoor / short-term outdoor / UV grade confirmed by application condition |
Removal Window | Confirm by substrate / adhesive / dwell time / environment / removal stage |
Sample Approval | Actual-substrate trial / 48-72 hour peel recheck / retained sample |
Peel Test Reference | Substrate / 180-degree peel method / peel speed / dwell period / conditioning environment |
Inspection Points | Edge lifting / early detachment / residue / glue transfer / ghosting / gloss change / clean removal |
Repeat Supply Control | Batch reference / retained sample / repeat-order parameter check |
As a surface protective film supplier, Protective Film China Company prepares matched samples after operating conditions are confirmed. Before sampling, confirm finish, coating condition, thickness, tack, color, custom slit width, roll length, winding direction, perforation, printing, application method, exposure, and planned removal date. Agree regular or reverse winding before production. Retained samples and batch references help control repeat orders.
Use representative substrates rather than a generic panel. Test each finish, texture, coating, and color while recording cleanliness, application pressure, dwell time, and environmental conditions. Check initial adhesion, edge lifting, and early detachment, then repeat the peel review after 48-72 hours. Simulate UV exposure, humidity, temperature change, foot traffic, and removal timing. After removal, inspect residue, glue transfer, ghosting, gloss change, and marks. Record the approved grade, peel-test condition, retained sample, and batch control points.
Not as a default. Each surface needs a matched protection method and sample check. Carpet requires a dedicated grade.
Choose it for smooth, glossy, non-porous surfaces when repositioning or glue-free contact is important.
Confirm it through substrate, adhesive system, dwell time, UV exposure, humidity, and planned removal stage.
Provide substrate, finish, coating condition, target thickness, tack, roll size, color, winding direction, and planned removal date.