Protective Film China Company is a pet film screen protector factory supplying rolls, sheets and die-cut materials for electronic display protection. The range covers PET, TPU and hydrogel grades for phones, tablets, touch panels, cover lenses and industrial screens. Materials can be prepared for plotter cutting, precision die cutting or temporary protection. The right grade depends on screen geometry, clarity, haze, anti-static handling and the converting route.
Showing all 6 results
Screen protector film material should match the display surface and next process. PET suits flat screens, hard-coated surfaces and repeatable die cutting. TPU and hydrogel are better for curved edges, wearables and mixed-model plotter cutting. Temporary display protection film protects LCD panels, OLED modules, touch screens and cover lenses during inspection, assembly and handling.
A mobile screen protector film manufacturer may need slit rolls for repeated patterns. A display processor may instead need plastic film for display protection that stays flat and removes cleanly after the agreed dwell time.
Product Series | Supply Form | Suitable Use | Key Checks |
PET Screen Protector Material Roll | Roll / sheet | Flat phones, tablets, displays | Hard coating, haze, width |
TPU Hydrogel Material | Roll / plotter sheet | Curved screens, wearables | Flexibility, liner release |
Display Protection Film Sheet | Sheet / die-cut piece | LCD, OLED, cover lens | Adhesion, cleanliness, residue |
Anti-Static PET Protective Film / Anti Static Plastic Film Roll | Roll / sheet | Dust-sensitive handling | Treated side, resistance, humidity |
Anti-Glare and Matte PET Film | Roll / sheet | Bright displays, tablet writing | Haze, readability, touch feel |
Custom Die-Cut Protection Film | Die-cut piece | POS, kiosk, medical screens | Drawing, holes, pull tabs |
Start with screen shape and conversion method. PET works well for flat displays, clean edges and steady feeding. TPU or hydrogel is more practical for curved screens and on-demand cutting. Clear grades need optical clarity and low haze. Matte and anti-glare grades need controlled haze: enough to reduce glare, but not so much that text looks soft. Check touch sensitivity after application.
For temporary protection, test the adhesive on the actual cover lens, touch panel or display glass. Silicone pressure-sensitive adhesive can wet out treated screens smoothly. Acrylic adhesive is useful when holding strength and dwell time need adjustment. Thickness is only one factor. A clear PET grade can still fail if the release liner, adhesive side or winding direction does not match the cutter.
Material or Adhesive | Strengths | Better Fit | Verify Before Bulk Production |
PET Film | Flatness, clean cutting | Flat screens, die-cut parts | Thickness, hardness, haze |
TPU / Hydrogel Film | Flexibility, curved conformity | Curved screens, plotter cutting | Feeding, corner quality, liner release |
Removable Silicone Adhesive | Smooth wet-out | Screens and cover lenses | Bubbles, residue, compatibility |
Acrylic Adhesive | Adjustable temporary adhesion | Processing films | Dwell time, peel build-up, ghosting |
Anti-Static Grade | Reduces dust attraction | LCD, OLED, optical parts | Treated side, method, temperature, RH |
Approval should use the actual display glass, cover lens or touch panel. Record transmission and haze under ASTM D1003 for the selected clear or anti-glare grade. For hard-coated PET, confirm pencil hardness under ASTM D3363 rather than relying on an unqualified number. For removable grades, inspect peel behaviour after the planned dwell time, including residue, ghosting, edge lifting and trapped particles. Where static control matters, record the treated side, resistance target, method, temperature and RH, then observe dust attraction during unwinding and removal.
Item | Typical Range / Customizable Value |
Material Groups | PET / TPU / hydrogel |
Supply Format | Master roll / slit roll / sheet / die-cut piece |
Thickness | Confirm by material, screen type and approved construction |
Roll Width | Standard or custom slit width; confirm coating width and cutter layout |
Roll Length | Confirm by structure, thickness and unwinding method |
Sheet Size | Custom by plotter bed, display outline or drawing |
Film Structure | Single-layer / double-layer / triple-layer / multilayer |
Surface Finish | Clear / glossy / matte / anti-glare / privacy / paper-like |
Functions | Anti-scratch / anti-fingerprint / self-healing / anti-static |
Transmission and Haze | Record by grade and ASTM D1003 |
Surface Hardness | Confirm coating and ASTM D3363 |
Anti-Static Property | Record target by treated side, method, temperature and RH |
Adhesive System | Removable silicone / acrylic / self-wet grade |
Peel Adhesion | Record angle, speed, substrate and dwell time |
Core Size | 3 in or equipment-specific core |
Slitting Control | Confirm tolerance, coating width and clean edges |
Winding Direction | Confirm adhesive side, liner side and feeding direction |
Compatibility | Plotter cutting / slitting / die cutting / laser cutting where applicable |
Approval Record | Trial roll / pilot batch / retained sample / batch label / drawing revision |
Protective Film China Company prepares grades around the display surface and process route. Confirm substrate, geometry, finish, thickness, coating function, adhesive side and release-liner structure. For rolls, provide slit width, length, core size, coating width and winding direction. During a trial run, check flatness and liner release at the outer layer, middle section and near-core section.
For sheets and die-cut pieces, use a version-controlled drawing for radius, holes, pull tabs and feeding direction. Bulk production should follow an approved trial roll or pilot batch. Link the batch label to the retained sample and drawing revision for repeat orders.
Rolls suit repeated patterns and continuous feeding. Sheets suit sampling and mixed-model hydrogel cutting. Run material on the actual cutter before production. Check blade pressure, feeding stability, liner release, slit edges and corner quality. Review nesting to reduce trim waste. For die-cut pieces, inspect pull tabs and holes against the drawing. For rolls, confirm flatness and winding direction from the outer layer to near-core section.
PET suits flat displays. TPU or hydrogel is more suitable for flexible or curved edges.
Yes. As a pet film screen protector factory, we prepare rolls, sheets and die-cut pieces around the cutter, screen models, volume and feeding method.
Confirm treated side and resistance range under the specified environment, then observe dust attraction during handling and removal.
Record grade, finish, adhesive, liner, size, core, winding direction, test results, batch label, drawing revision and retained sample.