No products were found matching your selection.
Other Related Products
-
- Thickness: 75 micron / 3 mil / 0.003 inch
- Material: Clear PET polyester film
- Color: Natural transparent
- Form: Roll, slit roll, sheet
- Surface: Smooth, non-adhesive PET base film
- Use: Die cutting, insulation, overlays, windows, spacers
-
- Material: PE protective film
- Color: transparent blue
- Adhesive: removable acrylic adhesive
- Common thickness: 40 / 50 / 60 microns
- Roll format: manual and machine-use rolls
- Main use: temporary protection for smooth glass surfaces
-
- Material: PET film with pressure-sensitive adhesive
- Common total thickness: 25–125 microns
- Finish: clear, white, matte, or top-coated
- Adhesive: permanent, removable, or application-specific
- Supply form: jumbo roll, log roll, slit roll, or sheet
- Main use: labels, overlays, insulation, and protective lamination
-
- Material: PET optical film, coated protective film, or custom layered structure
- Finish: clear, matte anti-glare, or privacy
- Common Thickness: approx. 0.10 mm to 0.25 mm
- Appearance: transparent, matte, or dark privacy tone
- Supply Form: sheet format for converting, die cutting, or custom sizing
- Typical Use: phones, tablets, touch panels, and industrial display surfaces
-
- Material: PE base film
- Color: Clear or blue
- Adhesive: Low tack acrylic or silicone
- Format: Sheet, pre-cut blank, or die-cut piece
- Typical Thickness: 50 / 60 / 70 / 80 / 100 / 150 μm
- Typical Use: Screens, touch panels, PET, PC, PMMA, optical-facing surfaces
-
- Material: PE protective film
- Color: Clear, blue, black and white
- Thickness: 40–80 microns typical
- Adhesion: Low to medium removable tack
- Surface Fit: Stainless steel, PCM, VCM, painted metal
- Supply Form: Jumbo roll, log roll, slit roll, sheet
-
The melting point of PET film is generally 250°C–265°C, with 255°C–260°C used as a common industrial reference range. This value shows when the crystalline PET base film begins to melt. In actual converting, the film should not be judged by melting point alone. More practical data include PET film service temperature, glass transition range, thermal…
-
- Material:PET base film with silicone release coating
- Silicone side:Single-side or double-side silicone
- PET thickness:12–125 μm common range
- Release force: 5–700 g/inch
- Residual adhesion:Commonly ≥85%–90%
- Main use:Tape, label, die-cut, medical patch, electronic adhesive material
-
- Material: PE film with solvent-based acrylic adhesive
- Standard Thickness: 50 / 60 / 80 / 100 microns
- Standard Width: 50–1240 mm
- Standard Length: 100–500 m per roll
- Colors: Clear, blue, black & white, custom tinted
- Suitable Surfaces: Marble, granite, quartz, engineered stone, polished slabs
